This sound system for conference rooms is the premium solution for speech reproduction and intelligibility that provides 360° of smooth, even audio coverage. This conference sound system includes the SD5 SuperDispersion® omnidirectional drop tile ceiling speaker array and a high-performance 120W Bluetooth mixer amplifier to cover up to 2,500 square feet with crystal clear sound and impeccable speech reproduction. Wirelessly stream audio with your Bluetooth-enabled device or connect your existing audio-video equipment and conferencing hardware or personal audio device via the mixer amplifier. This audio system for conference rooms is perfect for meeting spaces, boardrooms, conference venues, meeting halls and venues, or any other conference spaces where vocal intelligibility is needed.

Use a smartphone, tablet, laptop or Bluetooth enabled PC to easily stream audio wirelessly to the system from anywhere in the room. Simply press the Mode button on the RMA120BT or remote control until the display indicates "BT", then go to settings in your device and select "PRA-BT" to pair. Once connected you're ready to play and control audio from your Bluetooth device.

The Pure Resonance Audio SD5 SuperDispersion® omnidirectional drop tile ceiling speaker array is the premium solution for speech reproduction and intelligibility that maximizes audio coverage. The SD5 drop ceiling speaker provides an industry-leading 50' by 50' of audio coverage in a smooth, even 360-degree coverage pattern and reproduces speech better than any ceiling speaker on the market today. Just one SD5 speaker takes the place of multiple traditional single ceiling speakers, saving money, simplifying and reducing installation time and cost, and optimizing performance.

The simple to operate Pure Resonance Audio RMA120BT 5-channel commercial rack mount mixer amplifier features 120 watts of high-performance power encased in a slim and lightweight space-saving design. This mixer amplifier provides quick and easy Bluetooth connection as well as the ability to accommodate most input sources like microphones, AV equipment, or computer audio. Adjust the audio levels/settings as well as control the volume to the SD5 speakers with the included remote control.
 

Due to the possibilities of FM radio interference and the variables involved, it's not recommended to use FM radio as your primary input source.

Designed to install much quicker than a traditional ceiling speaker, the SD5 is built to save your most important currency, time. Simply remove one 2'x2' (or a cut 2'x4') ceiling tile, drop the SD5 into any standard drop-ceiling grid, and attach the speaker wire and safety cables. Detailed directions can be found in the provided manuals. Pay careful attention when pulling the speaker wire and hooking up the safety cables. No special audio skills are required. After the speakers and mixer amplifier are properly installed, connect your required input sources or pair a Bluetooth-enabled device, and adjust the volume to the desired level. Enjoy!

EMERGENCY AUDIO CUTOFF

In the event of an emergency, the RMA120BTs' emergency input (EMC In) can be configured to stop all other audio automatically. The emergency input takes priority over all other audio allowing an integrated emergency voice alarm system to be heard loud and clear. This input will work with an existing paging system, emergency paging mic, and, most importantly, a relay closure from a fire alarm system.

VC100W 100W DECORA 70V VOLUME CONTROL

The VC100W 100W white decora style 70V volume control is part of Pure Resonance Audio's family of speaker attenuators built to control volume for 25V/70V/100V sound systems. The VC100W features a durable plastic decora wall plate with a white finish and matching knob. This decora remote volume control provides excellent frequency response, low insertion loss, and reliable performance. The clean white decora style will fit in perfectly with decora wall plates for existing light switches and electrical outlets in your room.

SD5 CEILING SPEAKER:

Power Handling: 63 Watts RMS

Frequency Response: 46Hz - 20kHz

Sensitivity: 90 dB @ 2.83V/1M

Impedance: 8 ohms with Built-in 70V transformer

Drivers: (3) 5.25" drivers; (1) 3" tweeter

70V Transformer Taps: 7.5W, 15W, 30W, 60W @ 70V; 8 ohm Bypass

Dispersion: 360° by 180°

Dimensions: 23.75" (603 mm) x 23.75" (603 mm) x 5" (128.5 mm)

Net Weight: 21.45 lbs (9.73 kg)

RMA120BT MIXER AMPLIFIER:

Rated Power Output: 120W

Speaker Outputs: 4 - 16Ω/70V

Frequency Response: 80Hz~16kHz +/- 3dB

S/N Ratio: MIC1, 2, 3: 66dB; AUX1, 2: 85dB

THD: 0.05%

Cooling Mode: Forced fan with variable speed cooling with side entry airflow

Protection: Overheat/Short-circuit

Remote Control: IR remote control with (replaceable) CR2025 3V lithium battery

Dimensions: 1.73" (44 mm) x 19.05" (484 mm) x 11.61" (295 mm)

Weight: 9.92 lbs (4.5 kg)

VC100W 100W DECORA 70V VOLUME CONTROL:

Plate Size: Single Gang

Plate Type: Decora White

Power Rating: 100W

Total Attenuation: 30 dB

Frequency Response: 100 - 20kHz

Connector: Detachable Phoenix-style Euroblock Terminal

Dimensions (H x W x D): 4.5" (114.3 mm) x 2.75" (69.85 mm) x 2.5" (63.5 mm)

Weight: 1 lbs (0.45 kg)

Shipping Weight: 2 lbs (0.91 kg)