Designed as an all-in-one solution for configuring and operating multi-zone audio systems for hotels, sports venues, and houses of worship, schools, retail spaces, restaurants, meeting and conference spaces, the Pure Resonance Audio RZMA240BT 4 zone commercial mixer amplifier is designed with 4 ohms, 70 volt and 100 volt terminals and 240W power output per zone. It is a rack mount audio matrix system multi-room solution with MP3, tuner, and Bluetooth.

This advanced multi-input audio mixer amplifier features matrix technology, letting you route up to 5 separate inputs to 4 distinct zones. Ideal for multi-zone paging, music distribution, and room-combining applications, each input is also supplied with separate bass, treble and volume control for precise sound in each individual zone.

The RZMA240BT is equipped with zone-selectable inputs, meaning that an input can be assigned to any output. You simply push a button to route your inputs to the appropriate outputs, no programming or tuning required. You can also mix 70V and 8 ohms between zones with high impedance and low impedance supported with every zone.

Advanced matrix technology allows four zone selectable inputs to be assigned to a zone, or across multiple zones with the push of a button. Analog routing via button assignments means that no programming is needed. You can easily route outputs through the button selections on each input on the front of the mixer amplifier.

The rear inputs on the RZMA240BT include 3 XLR/TRS combo jacks with MIC or LINE level switching, dual RCA inputs with variable gain control, telephone phone input with variable gain control, and remote mic input via network category cabling.

High or low impedance outputs at 4 ohms, 70V, and 100V are configurable by zone. The inputs and outputs can be matrix selected, thus it is a highly integrated 4 channel audio matrix system solution with MP3 player for hotels, shopping malls, sports centers, entertainment centers, etc.

Built-in Control Room Monitoring

A monitor is built-in for in-room monitoring use with 1 watt/8 ohm output for zone monitoring. The control room can monitor any combinations of zone outputs and has its own level.

Line Outs Accessible for Every Zone

Balanced 1-volt line level outputs at 600Ω are available for every zone.

RS232 Serial Communication Port

An RS232 serial control port command set is available upon request.

Due to the possibilities of FM radio interference and the variables involved, it's not recommended to use FM radio as your primary input source.

Rated Power Output: 4 Zone channels x 240W (960W total)

Speaker Outputs: 4Ω, 70V/100V

Monitor Output: 1W/8 Ω

Input Sensitivity and Impedance:
CH1, CH2, CH3: MIC: ± 2.5mV/600 Ω
PHANTOM: ± 2.5mV
LINE: ~175mV/10K Ω balance input
CH5~6: 350mV/10K Ω balance input
TEL: 350mV/10K Ω
REMOTE MIC: ± 387mV/10K Ω

Tone:
Bass: ±10dB at 100Hz
Treble: ±10dB at 100Hz

S/N Ratio: >65dB

LINE 1-4 Output Level: 1V/600 Ω (balance output)

Frequency: 80 - 16 kHz

MP3: Support MP3 format, max capacity of 32GB

TF File System: Only FAT16, FAT32, the biggest one partition, does not support folder to store

Harmonic Distortion: <1%

Power Consumption: 1500W

Supply Voltage: ~120V 60Hz

Relative Humidity: <95% (No condensation)

Remote Control: IR remote control with (replaceable) CR2025 3V lithium battery

Rack Spaces: 3U

Dimensions (H x W x D): 5.20" (132 mm) x 19" (483 mm) x 17.32" (440 mm)

Weight: 41.2 lbs (18.69 kg)

Shipping Weight: 64 lbs (29.03 kg)