This sound masking system for commercial offices adds ambient white noise for speech privacy as well as background music, and paging. Increase privacy, improve focus or effectively mask a disruptive environment. This sound masking solution is perfect for financial organizations, insurance offices, law offices, church offices, or any commercial application where reduced distractions and speech privacy is required. The SP8 can replace multiple single speakers and provides approximately 20' x 20' or 400 sq ft of audio coverage from a single speaker. Perfect for buildings with minimal space between the structural ceiling and the dropped ceiling, the SP8 ceiling speakers have a slim mounting depth of only 3.9" (100 mm).

For this system, we recommend tapping the SP8 ceiling speakers at 5W each for sound masking and optional low-key background music. If you have any questions please contact our sales engineers at (866) 676-7804 or sales@pureresonanceaudio.com.

The Pure Resonance Audio SP8 SoundPlane is a full-range ceiling tile speaker designed to drop into a 2'x2' suspended grid ceiling without having to cut holes or modify ceiling tiles. This offers a fast, easy, and cost-effective solution that saves installation time, effort, and expenses. A built-in adjustable 70V 10-watt transformer is conveniently accessible and located on the side of the rear back-box. The 2x2 drop-in ceiling speaker contains a full-range 8" treated paper main cone driver, a secondary high frequency cone, with a 10 ounce magnet. The fully enclosed back-can is constructed of industrial-grade steel. The solid white panel with a perforated speaker grille seamlessly blends with the decor in most acoustic drop ceiling tiles. Built-in seismic safety strap tabs are integrated on the steel back-can for suspension mounting from ceiling points (consult your architect or engineer before installing).

The 7-channel MA60BT mixer-amplifier features a built-in 70V/100V transformer technology that provides a simple to operate and reliable 6-input solution with a built-in Bluetooth media player for installation in commercial applications. Balanced and unbalanced inputs 70 Volt, 100 Volt, 8 ohm or 4 ohm outputs, compact size and interface are all combined to make this mixer-amp an easy choice for any application in need of background music and general announcements.

Due to the possibilities of FM radio interference and the variables involved, it's not recommended to use FM radio as your primary input source.

Pure Resonance Audio has taken the mystery out of sound masking by creating an affordable USB sound masking generator that's small, portable and incredibly easy to use. The PrivacyCard™ sound masking generator pairs ambient white noise with the all-so-familiar USB drive enabling you to plug-in and play white noise into any space with almost any USB mixer or mixer-amplifier.

RMS Power: 20W @ 8 Ohms

Frequency Response: 200Hz - 16kHz

Sensitivity (1M/1W): 92dB

Nominal Impedance: 8 Ohms

Transformer: 70V: 1.3W / 2.5W / 5W / 10W /  8 Ohm
                           100V: 2.5W / 5W / 10W /  8 Ohm

Speaker Size: 8" Paper Cone

Audio Input: Phoenix Type Pluggable Terminal Block

Grill Type: Square Grill

Mounting Depth: 3.9" (100 mm) 

Dimensions: 23.8" (605 mm) x 23.8" (605 mm) x 3.9" (100 mm)

Net Weight: 13.6 lbs (6.2 kg)                                                                                                                                                              

Rated Power Output: 60W

Speaker Outputs: 70V, 100V and 4 Ohms, 8 Ohms or 16 Ohms

Connectors:
Mic 1 input by balanced XLR with phantom power
Input 2-3 Mic/Line switchable unbalanced 1/4" (6.3 mm) phone jack
Line 1-2 inputs by RCA; Line output by RCA

Frequency Response: 60Hz - 15kHz (±3dB)

Protection: Short-circuit, clip, overload and high temp protection

Dimensions: 3.5" (88 mm) x 11.8" (300 mm) x 10.8" (275 mm)

Weight: 9.04 lbs (4.1 kg)